Fujitsu ETERNUS4000 400 Руководство - Страница 23

Просмотреть онлайн или скачать pdf Руководство для Хранение Fujitsu ETERNUS4000 400. Fujitsu ETERNUS4000 400 28 страниц. Disk storage systems (fibre channel) for oracle solaris
Также для Fujitsu ETERNUS4000 400: Руководство (21 страниц), Руководство по подключению сервера (25 страниц), Руководство по подключению сервера (32 страниц), Руководство по подключению (19 страниц)

Chapter 8

8.1

To turn on the connected devices, use the following procedures:

8.2

Check the state of the ETERNUS Disk storage system LUNs (logical units) using the "format"

command.

Example: ETERNUS2000

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1

Specify disk (enter its number): Specify disk (enter its number):

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Checking Connections

Procedure

Turn on any devices (such as LAN switches) on the LAN path between the

ETERNUS Disk storage system and server.

After checking that the Ready (or equivalent) LED of the LAN switch is lit, turn on

the ETERNUS Disk storage systems.

After checking that the ETERNUS Disk storage systems' Ready LED is lit, turn

on the server.

1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

End of procedure

Indicates connection

via "CM0"

Indicates connection

via "CM1"