Brother DCP-130C Manuel d'installation rapide - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother DCP-130C. Brother DCP-130C 22 pages. Windows vista
Également pour Brother DCP-130C : Fiche technique (2 pages), Manuel d'installation rapide (22 pages), Manuel de configuration (23 pages), Manuel d'installation rapide (24 pages), Manuel de l'utilisateur (47 pages), Manuel d'installation rapide (15 pages)

Installing the Driver & Software

For USB Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on pages 4-9.

Note

For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com)

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Insert the USB cable into the USB socket

marked with a

USB socket inside the machine on the right as

shown below.

X 10.2.4 or greater)

X, visit

symbol. You will find the

Carefully route the USB cable through the

trench and out the back of the machine as

shown below.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock (

Gently push the scanner cover support down

(

) and close the scanner cover (

Turn on the machine by connecting the power

cord.

Macintosh