Brother DCP-130C 빠른 설정 매뉴얼 - 페이지 17
{카테고리_이름} Brother DCP-130C에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-130C 22 페이지. Windows vista
Brother DCP-130C에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 빠른 설정 매뉴얼 (22 페이지), 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (24 페이지), 사용자 설명서 (47 페이지), 빠른 설정 매뉴얼 (15 페이지)
Installing the Driver & Software
For USB Interface Users
(For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4-9.
Note
®
For Mac OS
X 10.2.0 to 10.2.3 users, upgrade to
®
Mac OS
X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
2
Insert the USB cable into the USB socket
marked with a
USB socket inside the machine on the right as
shown below.
®
X 10.2.4 or greater)
®
X, visit
symbol. You will find the
3
Carefully route the USB cable through the
trench and out the back of the machine as
shown below.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
4
Lift the scanner cover to release the lock (
Gently push the scanner cover support down
(
) and close the scanner cover (
5
Turn on the machine by connecting the power
cord.
®
Macintosh
).
).
15