Brother MFC-8710DW Manuel d'installation rapide - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-8710DW. Brother MFC-8710DW 45 pages. Quick setup guide - english
Également pour Brother MFC-8710DW : Manuel (30 pages), Manuel (36 pages), Manuel de l'utilisateur (23 pages), Manuel d'installation rapide (45 pages), Manuel de sécurité des produits (23 pages)

Wired Network

For Wired Network Interface Users

(Mac OS X 10.5.8 - 10.7.x)

Before you install

Make sure your machine is connected to the

power and your Macintosh is ON. You must be

logged on with Administrator rights.

Important

For users of Mac OS X 10.5.7 or lower, upgrade

to Mac OS X 10.5.8 - 10.7.x. (For the latest

drivers and information for the Mac OS X you are

using, visit http://solutions.brother.com/.)

Note

If you want to add the PS driver (BR-Script3

printer driver), please go to the Brother Solutions

Center at http://solutions.brother.com/ and visit

FAQ's on your model page for instructions.

Remove the protective cap from the Ethernet

port marked with a

Connect the network interface cable to the

Ethernet port and then connect it to a free port

on your hub.

Make sure your machine's power switch is on.

symbol.

Install MFL-Pro Suite

Put the installer CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon. If

prompted, select your model.

Choose Wired Network Connection

(Ethernet) and then click Next. Follow the

on-screen instructions.

Important

DO NOT cancel any of the screens during the

installation. It may take a few minutes for the

installation to complete.

Choose your machine from the list, and then

click OK.

Note

If your machine is not found over the network,

confirm your network settings. See Before you

install on page 23.

Macintosh