Brother MFC-8710DW Hızlı Kurulum Kılavuzu - Sayfa 23
Yazılım Brother MFC-8710DW için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-8710DW 45 sayfaları. Quick setup guide - english
Ayrıca Brother MFC-8710DW için: Manuel (30 sayfalar), Manuel (36 sayfalar), Kullanıcı Kılavuzu (23 sayfalar), Hızlı Kurulum Kılavuzu (45 sayfalar), Ürün Güvenlik Kılavuzu (23 sayfalar)
Sayfayı Yazdır
Wired Network
For Wired Network Interface Users
(Mac OS X 10.5.8 - 10.7.x)
19
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
Important
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
Note
If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother Solutions
Center at http://solutions.brother.com/ and visit
FAQ's on your model page for instructions.
b
Remove the protective cap from the Ethernet
port marked with a
c
Connect the network interface cable to the
Ethernet port and then connect it to a free port
on your hub.
d
Make sure your machine's power switch is on.
symbol.
20
Install MFL-Pro Suite
a
Put the installer CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon. If
prompted, select your model.
c
Choose Wired Network Connection
(Ethernet) and then click Next. Follow the
on-screen instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
d
Choose your machine from the list, and then
click OK.
Note
If your machine is not found over the network,
confirm your network settings. See Before you
install on page 23.
Macintosh
23