Brother MFC490CW - Color Inkjet - All-in-One Manuel d'installation rapide - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 47 pages. Mac network connection
Également pour Brother MFC490CW - Color Inkjet - All-in-One : Manuel d'installation rapide (48 pages), Mise en place et installation (5 pages), Manuel de connexion (6 pages), Instructions de réparation (2 pages)
Imprimer la page
Wired Network
c
Carefully guide the network cable to the trench
as shown below, following the trench around
and toward the back of the machine. Then,
connect the cable to your network.
Note
If both USB and LAN cables are being used,
guide both cables through the trench with one on
top of the other.
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down
and close the scanner cover c.
b
20
1
3
2
15
Connect the power cord
a
Connect the power cord.
Important
If you have previously set up your machine for
a wireless network and then want to set it up
on a wired network, you should check that the
machine's Network I/F is set to Wired LAN.
The wireless network interface will become
inactive with this setting.
On your machine, press Menu.
Press a or b to choose Network and press OK.
Press a or b to choose Network I/F and
press OK.
Press a or b to choose Wired LAN and press
OK.
Press Stop/Exit.
®
Windows