Brother Quattro 6000D Manuel d'utilisation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Brother Quattro 6000D. Brother Quattro 6000D 6 pages. Kit de actualización iii
Également pour Brother Quattro 6000D : Manuel (42 pages), Manuel d'utilisation (50 pages), Manuel de l'utilisateur (48 pages), Manuel d'utilisation (29 pages), Manuel d'utilisation (21 pages), (anglais) Instruction Manual (49 pages), (anglais) Instruction Manual (21 pages), (anglais) Instruction Manual (48 pages)

Imprimer la page
Brother Quattro 6000D Manuel d'utilisation
SAVING A CAMERA IMAGE OR
SETTINGS SCREEN IMAGE TO
USB MEDIA
An image of the needle position being displayed by the
built-in camera or an image of the Settings screen can be
saved as a BMP file.
A maximum of 100 images can be saved on a single USB
media at one time.
a
Insert the USB media into the primary
(top) USB port on the right side of the
machine.
Primary (top) USB port
a
USB media
b
Note
•
If two USB medias are inserted simultaneously, the files
will be saved only on the USB media inserted first.
b
D isplay the screen to be saved, and then
save the displayed image.
Note
•
An image can be captured only of screens containing the
indicated key
To save an image of the needle position displayed by
„
the built-in camera
Memo
•
For details about using the built-in camera to display the
needle position, refer to "Checking the Needle Location
in the Screen" in the machine's Operation Manual.
Press
.
→
The image file will be saved to the USB media.
2
/
.
To save an image of the Settings screen
„
Memo
•
For details about displaying the Settings screen, refer to
"Using the Machine Setting Mode Key" in the machine's
Operation Manual.
Press
.
→
The image file will be saved to the USB media.
c
Remove the USB media, and then check
the saved image(s) using a computer.
The files for camera images are saved with the
name "C**.BMP", and the files for Settings screen
images are saved with the name "S**.BMP".
•
"**" in the names "C**.BMP" and "S**.BMP" will
automatically be replaced with a number between
00 and 99.
Note
•
If 100 image files have already been saved on the USB
media, the following message appears.
In this case, delete a file from the USB media or use
different USB media.