SAVING A CAMERA IMAGE OR
SETTINGS SCREEN IMAGE TO
USB MEDIA
An image of the needle position being displayed by the
built-in camera or an image of the Settings screen can be
saved as a BMP file.
A maximum of 100 images can be saved on a single USB
media at one time.
a
Insert the USB media into the primary
(top) USB port on the right side of the
machine.
Primary (top) USB port
a
USB media
b
Note
•
If two USB medias are inserted simultaneously, the files
will be saved only on the USB media inserted first.
b
D isplay the screen to be saved, and then
save the displayed image.
Note
•
An image can be captured only of screens containing the
indicated key
To save an image of the needle position displayed by
the built-in camera
Memo
•
For details about using the built-in camera to display the
needle position, refer to "Checking the Needle Location
in the Screen" in the machine's Operation Manual.
Press
.
→
The image file will be saved to the USB media.
2
/
.
To save an image of the Settings screen
Memo
•
For details about displaying the Settings screen, refer to
"Using the Machine Setting Mode Key" in the machine's
Operation Manual.
Press
.
→
The image file will be saved to the USB media.
c
Remove the USB media, and then check
the saved image(s) using a computer.
The files for camera images are saved with the
name "C**.BMP", and the files for Settings screen
images are saved with the name "S**.BMP".
•
"**" in the names "C**.BMP" and "S**.BMP" will
automatically be replaced with a number between
00 and 99.
Note
•
If 100 image files have already been saved on the USB
media, the following message appears.
In this case, delete a file from the USB media or use
different USB media.
페이지 인쇄