Brother Quattro 6000D Manuel d'utilisation - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Brother Quattro 6000D. Brother Quattro 6000D 29 pages. Kit de actualización iii
Également pour Brother Quattro 6000D : Manuel (42 pages), Manuel d'utilisation (50 pages), Manuel d'utilisation (6 pages), Manuel de l'utilisateur (48 pages), Manuel d'utilisation (21 pages), (anglais) Instruction Manual (49 pages), (anglais) Instruction Manual (21 pages), (anglais) Instruction Manual (48 pages)

■ Positioning the pattern on thick fabric

When positioning the pattern on thick fabric such as

quilting, the fabric may not be detected correctly. In

order for the fabric to be correctly detected, its

thickness must first be measured.

Memo

• This feature is functional only when the fabric is

scanned. It will not affect embroidering if it is turned

on with normal embroidery.

Hoop the fabric in the embroidery frame, and

then attach the frame to the embroidery

machine.

Select the pattern, and then press

Display page 8/8 of the Settings screen, and

then set "Fabric Thickness Sensor" to "ON".

Press

Affix the embroidery positioning sticker to the

fabric within the area indicated by the red

frame in the LCD, and then press

When the following message appears, remove

the embroidery positioning sticker, and then

press

→ The embroidery frame is moved, and the

embroidery positioning sticker affixed to the fabric is

detected.

Continue with step

pattern with the desired embroidery position.

• Use fabrics with a thickness of less than 3 mm

(approx. 1/8 inch). Using fabrics thicker than 3 mm

(approx. 1/8 inch) may cause the needle to break.

on page 21 to align the

CAUTION