Brother Quattro 6000D Manual de operação - Página 23

Procurar online ou descarregar pdf Manual de operação para Software Brother Quattro 6000D. Brother Quattro 6000D 29 páginas. Kit de actualización iii
Também para Brother Quattro 6000D: Manual (42 páginas), Manual de operação (50 páginas), Manual de operação (6 páginas), Manual do utilizador (48 páginas), Manual de operação (21 páginas), (Inglês) Manual de instruções (49 páginas), (Inglês) Manual de instruções (21 páginas), (Inglês) Manual de instruções (48 páginas)

■ Positioning the pattern on thick fabric

When positioning the pattern on thick fabric such as

quilting, the fabric may not be detected correctly. In

order for the fabric to be correctly detected, its

thickness must first be measured.

Memo

• This feature is functional only when the fabric is

scanned. It will not affect embroidering if it is turned

on with normal embroidery.

Hoop the fabric in the embroidery frame, and

then attach the frame to the embroidery

machine.

Select the pattern, and then press

Display page 8/8 of the Settings screen, and

then set "Fabric Thickness Sensor" to "ON".

Press

Affix the embroidery positioning sticker to the

fabric within the area indicated by the red

frame in the LCD, and then press

When the following message appears, remove

the embroidery positioning sticker, and then

press

→ The embroidery frame is moved, and the

embroidery positioning sticker affixed to the fabric is

detected.

Continue with step

pattern with the desired embroidery position.

• Use fabrics with a thickness of less than 3 mm

(approx. 1/8 inch). Using fabrics thicker than 3 mm

(approx. 1/8 inch) may cause the needle to break.

on page 21 to align the

CAUTION