Fujitsu F2MC-8FX Series Manuel de configuration - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 18 pages. 8-bit microcontroller
Également pour Fujitsu F2MC-8FX Series : Manuel d'utilisation (20 pages), Note d'application (12 pages), Note d'application (23 pages), Manuel de configuration (19 pages), Manuel de configuration (30 pages), Note d'application (20 pages), Note d'application (21 pages), Manuel d'utilisation (21 pages), Manuel de configuration (23 pages), Manuel de l'utilisateur (24 pages), Manuel de configuration (17 pages)

3 Development Platform Quick Start

Start the debugging system in the following sequence:

Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;

Connect an EV board to BGMA IDC10 socket;

Power on EV board power supply, confirm the LED on the BGMA is orange.

Users can start a debug from a PC software SOFTUNE workbench in the following

sequence. Here take IO_TEST project for example.

Start the SOFTUNE from "Startup Menu>Programs> SOFTUNE V3> FFMC-8L Family

SOFTUNE Workbench" in Windows;

Click "Open workspace" from "File" Menu in SOFTUNE;

Select "IO_TEST.wsp" in "Open Space" window;

Click "Start debug" from "Debug" Menu.

If the entire procedure goes right, a debug will start normally.

EV Board MB2146-441-E Setup Guide

Chapter 3 Development Platform Quick Start

Page 14