Fujitsu F2MC-8FX Series Setup Manual - Halaman 16

Jelajahi secara online atau unduh pdf Setup Manual untuk Motherboard Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 18 halaman. 8-bit microcontroller
Juga untuk Fujitsu F2MC-8FX Series: Panduan Pengoperasian (20 halaman), Catatan Aplikasi (12 halaman), Catatan Aplikasi (23 halaman), Setup Manual (19 halaman), Setup Manual (30 halaman), Catatan Aplikasi (20 halaman), Catatan Aplikasi (21 halaman), Panduan Pengoperasian (21 halaman), Setup Manual (23 halaman), Panduan Pengguna (24 halaman), Setup Manual (17 halaman)

3 Development Platform Quick Start

Start the debugging system in the following sequence:

Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;

Connect an EV board to BGMA IDC10 socket;

Power on EV board power supply, confirm the LED on the BGMA is orange.

Users can start a debug from a PC software SOFTUNE workbench in the following

sequence. Here take IO_TEST project for example.

Start the SOFTUNE from "Startup Menu>Programs> SOFTUNE V3> FFMC-8L Family

SOFTUNE Workbench" in Windows;

Click "Open workspace" from "File" Menu in SOFTUNE;

Select "IO_TEST.wsp" in "Open Space" window;

Click "Start debug" from "Debug" Menu.

If the entire procedure goes right, a debug will start normally.

EV Board MB2146-441-E Setup Guide

Chapter 3 Development Platform Quick Start

Page 14