Fujitsu PRIMERGY TX100 S1 Manuel des options - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel des options pour {nom_de_la_catégorie} Fujitsu PRIMERGY TX100 S1. Fujitsu PRIMERGY TX100 S1 46 pages. For tx100 s1
Également pour Fujitsu PRIMERGY TX100 S1 : Spécifications (13 pages), Manuel de supplément de service (46 pages), Manuel technique (32 pages)
Imprimer la page
5
Main memory
V
CAUTION!
Follow the safety instructions in the chapter
page
11.
The system board supports up to 8 GB of main memory. 4 slots (2 memory
banks with 2 slots each) are provided for the main memory. Every slot can be
fitted with 1 GB or 2 GB unbuffered DDR2 memory modules (PC2-6400 800
MHz).
5.1
Equipping rules
Figure 7: Configuration of the main memory
– Each memory bank is equipped with two memory modules with the same
capacity. Memory access takes place in 2-way interleaved mode.
– The module capacity between pairs can differ: pair 1A/1B can be populated
with two 1 GB modules and pair 2A/2B with two 2 GB modules.
TX100 S1
2B
1B
2A
1A
Options Guide
"Safety instructions" on
23