Fujitsu PRIMERGY TX100 S1 Manual Opsi - Halaman 23
Jelajahi secara online atau unduh pdf Manual Opsi untuk Motherboard Fujitsu PRIMERGY TX100 S1. Fujitsu PRIMERGY TX100 S1 46 halaman. For tx100 s1
Juga untuk Fujitsu PRIMERGY TX100 S1: Spesifikasi (13 halaman), Panduan Suplemen Servis (46 halaman), Panduan Teknis (32 halaman)
Halaman Cetak
5
Main memory
V
CAUTION!
Follow the safety instructions in the chapter
page
11.
The system board supports up to 8 GB of main memory. 4 slots (2 memory
banks with 2 slots each) are provided for the main memory. Every slot can be
fitted with 1 GB or 2 GB unbuffered DDR2 memory modules (PC2-6400 800
MHz).
5.1
Equipping rules
Figure 7: Configuration of the main memory
– Each memory bank is equipped with two memory modules with the same
capacity. Memory access takes place in 2-way interleaved mode.
– The module capacity between pairs can differ: pair 1A/1B can be populated
with two 1 GB modules and pair 2A/2B with two 2 GB modules.
TX100 S1
2B
1B
2A
1A
Options Guide
"Safety instructions" on
23