Indesit DIFP 28T9 Manuel d'utilisation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Indesit DIFP 28T9. Indesit DIFP 28T9 16 pages.
Imprimer la page- 1. Table of Contents
- 2. Precautions and Advice
- 3. Product Data
- 4. Installation
- 5. Electrical Connection
- 6. Description of the Appliance
- 7. Refined Salt and Rinse Aid
- 8. Loading the Racks
- 9. Detergent and Dishwasher Use
- 10. Wash Cycles
- 11. Special Wash Cycles and Options
- 12. Care and Maintenance
- 13. Troubleshooting
- 14. Product Guarantee and Repair Information
Care and maintenance
GB
14
Cleaning the filters
The filter assembly consists of three filters which remove food
residues from the washing water and then recirculate the water.
They should be cleaned if you wish to achieve the best results
in every wash.
Clean the filters regularly.
The dishwasher should not be used without filters or if the
filter is loose.
• After several washes, check the filter assembly and if necessary
clean it thoroughly under running water, using a non-metallic
brush and following the instructions below:
1. Turn the cylindrical filter C in an anti-clockwise direction and
(fig. 1).
pull it out
2. Remove the cup filter B by exerting a slight pressure on the
(fig. 2);
side flaps
3. Slide out the stainless-steel plate filter A.
4. Inspect the trap and remove any food residues. NEVER
REMOVE the wash-cycle pump protection
After cleaning the filters, re-place the filter assembly and fix it in
position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
Leaving the machine unused for extended
periods
• Disconnect the appliance from the electricity supply and shut
off the water tap.
• Leave the door of the appliance ajar.
• When you return, run a wash cycle when the dishwasher is
empty.
*
Only available in selected models.
(fig. 3).
(black detail) (fig.4).