AEG SANTO 70398-28 DT Manuel d'utilisation - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG SANTO 70398-28 DT. AEG SANTO 70398-28 DT 40 pages.

Imprimer la page

Rehingeing the door

The door opening can be reversed if

required.

Warning! When reversing the door

the appliance may not be connected

to the mains. Remove plug from the

mains beforehand.

Procced as follows:

Remove the upper hinge by

unscrewing the fixing screws taking

care for the upper door not to fall

off.

Remove the upper door.

Remove the upper cover by

unscrewing the fixing screws and fix

it in the opposite side.

Remove the middle hinge by

unscrewing the fixing screws.

Remove the lower door.

Unscrew the plastic plugs on the

middle crossbeam and screw them in

the opposite side.

Pull off the plinth by unscrewing the

fixing screws.

Remove the lower hinge by

unscrewing the fixing screws.

Using a 12mm spanner, unscrew the

hinge pin and reassemble it in the

opposite side of the hinge.

Remove the leveling foot placed

below the side of the appliance and

screw it in the opposite side.

Fix the lower hinge on the opposite

side using the screws previously

removed. Slide the cover out of the

plinth by pushing it in the direction

of the arrow and reassemble it in the

opposite side.

10.

Fix the plinth using the screws pre-

viously removed.

11.

Reassemble the lower door.

12.

Fix the middle hinge in the

opposite side using the screws

previously removed.