AEG SCE8181VTS Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG SCE8181VTS. AEG SCE8181VTS 24 pages. Fridge freezers
Également pour AEG SCE8181VTS : Manuel de l'utilisateur (20 pages)

Imprimer la page

www.aeg.com

Problem

There is too much frost and

ice.

The compressor does not

start immediately after

pressing the "Frostmatic" or

"Coolmatic", or after chang-

ing the temperature.

Water flows on the rear

plate of the refrigerator.

Water flows inside the refrig-

erator.

Water flows on the floor.

Temperature cannot be set.

dEMo appears on the dis-

play.

Possible cause

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

The water drainage plug is

not correctly positioned.

Appliance is fully loaded

and it is set to the lowest

temperature

Temperature set in the ap-

pliance is too low and the

ambient temperature is

too high.

Temperature is set incor-

rectly.

This is normal, no error has

occurred.

During the automatic de-

frosting process, frost

melts on the rear plate.

Food products prevent the

water to flow into the wa-

ter collector.

The water outlet is clog-

ged.

The melting water outlet is

not connected to the

evaporative tray above the

compressor.

The "Frostmatic function"

or "Coolmatic function" is

switched on.

The appliance is in demon-

stration mode.

Solution

Refer to "Closing the door".

Position the water drainage

plug in the correct way.

Set a higher temperature. Re-

fer to "Operation".

Set a higher temperature. Re-

fer to "Operation"

Refer to "Operation" .

The compressor starts after a

period of time.

This is correct.

Make sure that food products

do not touch the rear plate.

Clean the water outlet.

Attach the melting water out-

let to the evaporative tray.

Switch off "Frostmatic func-

tion" or "Coolmatic function"

manually, or wait until the

function resets automatically

to set the temperature. Refer

to "Frostmatic function" or

"Coolmatic function".

Keep the OK pressed for ap-

proximately 10 seconds until a

long sound is heard and dis-

play shuts off for a short time.