AEG SCE8181VTS Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG SCE8181VTS. AEG SCE8181VTS 24 pagina's. Fridge freezers
Ook voor AEG SCE8181VTS: Gebruikershandleiding (20 pagina's)

Pagina afdrukken

www.aeg.com

Problem

There is too much frost and

ice.

The compressor does not

start immediately after

pressing the "Frostmatic" or

"Coolmatic", or after chang-

ing the temperature.

Water flows on the rear

plate of the refrigerator.

Water flows inside the refrig-

erator.

Water flows on the floor.

Temperature cannot be set.

dEMo appears on the dis-

play.

Possible cause

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

The water drainage plug is

not correctly positioned.

Appliance is fully loaded

and it is set to the lowest

temperature

Temperature set in the ap-

pliance is too low and the

ambient temperature is

too high.

Temperature is set incor-

rectly.

This is normal, no error has

occurred.

During the automatic de-

frosting process, frost

melts on the rear plate.

Food products prevent the

water to flow into the wa-

ter collector.

The water outlet is clog-

ged.

The melting water outlet is

not connected to the

evaporative tray above the

compressor.

The "Frostmatic function"

or "Coolmatic function" is

switched on.

The appliance is in demon-

stration mode.

Solution

Refer to "Closing the door".

Position the water drainage

plug in the correct way.

Set a higher temperature. Re-

fer to "Operation".

Set a higher temperature. Re-

fer to "Operation"

Refer to "Operation" .

The compressor starts after a

period of time.

This is correct.

Make sure that food products

do not touch the rear plate.

Clean the water outlet.

Attach the melting water out-

let to the evaporative tray.

Switch off "Frostmatic func-

tion" or "Coolmatic function"

manually, or wait until the

function resets automatically

to set the temperature. Refer

to "Frostmatic function" or

"Coolmatic function".

Keep the OK pressed for ap-

proximately 10 seconds until a

long sound is heard and dis-

play shuts off for a short time.