AEG SCE8186VTC Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG SCE8186VTC. AEG SCE8186VTC 20 pages.

Imprimer la page

www.aeg.com

Problem

instead of numbers on the

Temperature Display.

The lamp does not work.

The compressor operates

continually.

The compressor does not

start immediately after

pressing the "FROSTMAT-

IC" or "COOLMATIC", or af-

ter changing the tempera-

ture.

Water flows inside the refrig-

erator.

Water flows on the floor.

Possible cause

Temperature sensor prob-

symbol is shown

lem.

The lamp is in stand-by.

The lamp is defective.

Temperature is set incor-

rectly.

Many food products were

put in at the same time.

The room temperature is

too high.

Food products placed in

the appliance were too

warm.

The door is not closed cor-

rectly.

The "FROSTMATIC" or

"COOLMATIC" is switch-

ed on.

This is normal, no error has

occurred.

Food products prevent the

water to flow into the wa-

ter collector.

The water outlet is clog-

ged.

The melting water outlet is

not connected to the

evaporative tray above the

compressor.

Solution

Contact the nearest Author-

ised Service Centre (the cool-

ing system will continue to

keep food products cold, but

temperature adjustment will

not be possible).

Close and open the door.

Contact the nearest Author-

ised Service Centre.

Refer to "Operation".

Wait some hours and then

check the temperature again.

Refer to climate class chart on

the rating plate.

Allow food products to cool to

room temperature before stor-

ing.

Refer to "Closing the door".

Refer to "FROSTMATIC func-

tion" or "COOLMATIC func-

tion".

The compressor starts after a

period of time.

Make sure that food products

do not touch the rear plate.

Clean the water outlet.

Attach the melting water out-

let to the evaporative tray.