AEG CHDD 8795 Manuel d'utilisation et d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} AEG CHDD 8795. AEG CHDD 8795 17 pages. Electrolux cooker hood range hood models dd 8794 dd 8795 chdd 8795 operating and installation instructions
Également pour AEG CHDD 8795 : Instructions d'utilisation et d'installation (18 pages), Manuel d'utilisation et d'installation (22 pages), Instructions d'utilisation et d'installation (22 pages)

Charcoal filter

• The charcoal filter should only be used if you want to use the hood in

the recirculation function.

• To do this you will need an original AEG charcoal filter (available from

your local Service Force Centre).

• Cleaning/replacing the carbon filter

Unlike other carbon filters, the LONGLIFE carbon filter can be

cleaned and reactivated. At normal use the filter should be cleaned

every second month (when using the hood 2,5 hours per day, in

avarage). The best way to clean the filter is in the dishwasher. Use

normal detergent and choose the highest temperature (65º C). Wash

the filter separately so that no food parts gets stuck on the filter and

later causes bad odours. To reactivate the carbon, the filter should be

dried in an oven for 10 minutes with a temperature of maximum

100ºC.

After approximately three years of use, the carbon filter should be

replaced with a new, as the odour reduction capacity will be reduced.

• Fitting

Fit the charcoal filter on the rear side of the grease filter, fix it with

two metal wires. Fig. 6.

• To remove proceed in the

reverse order.

• Always specify the hood

model code number and

serial number when

ordering replacement filters.

This information is shown

on the registration plate

located on the inside of the

unit.

• The charcoal filter can be

ordered from your local

AEG Service Force Centre.

charcoal filter

metal wires

Fig. 6

grease filter