Kohler BodySpa Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Kohler BodySpa. Kohler BodySpa 12 pages. Module bathing system
Imprimer la pageE. THE PUMP AND HEATER
S The pump and heater combine to propel and
maintain the temperature of the water you add to
your BodySpa module.* The heater is located
inside the pump housing, and is designed to
automatically maintain the water temperature at a
comfortable level.
* Maintains the temperature if installed as
recommended.
F. THE ADJUSTABLE WHIRLPOOL JETS
S The whirlpool Flexjets are strategically placed for
optimum hydro-massage. Each jet separately
controls the amount of air and water you allow into
the whirlpool during operation. The amount of air
and water, and thus the intensity of your
hydro-massage experience, is determined by how
far you open the Flexjet trim ring.
4. OPERATING INSTRUCTIONS
A. GETTING READY TO USE YOUR BODYSPA
WARNING: Risk of injury or property damage.
BodySpa controls are factory installed. Do not
relocate or modify controls as this could adversely
affect safe operation.
Please read and follow these steps carefully so you can
safely enjoy the benefits of BodySpa hydro-massage
bathing.
S Remove your eyeglasses, contact lenses, and
loose jewelry before entering the BodySpa module.
S Shower before using your BodySpa, if you desire.
S Do not use shampoo, soap, or bubble bath in the
module bath water. Shampoo and soap may be
used for showering before filling the bath basin.
S Rinse down the enclosure and bath to remove soap
residue and debris.
S Remove all loose bathing items such as soap bars,
shampoo bottles, and washcloths from the
BodySpa module.
S Close the drain, and fill the bath basin with
tempered water to a level at least 2" above the
suction cover. Do not allow the water temperature
to exceed 104 F.
S Enter the BodySpa module, and close the door
tightly.
AA
114825-5-
(A)
6
Kohler Co., Kohler WI