Kohler BodySpa Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Armatura łazienkowa Kohler BodySpa. Kohler BodySpa 12 stron. Module bathing system

E. THE PUMP AND HEATER

S The pump and heater combine to propel and

maintain the temperature of the water you add to

your BodySpa module.* The heater is located

inside the pump housing, and is designed to

automatically maintain the water temperature at a

comfortable level.

* Maintains the temperature if installed as

recommended.

F. THE ADJUSTABLE WHIRLPOOL JETS

S The whirlpool Flexjets are strategically placed for

optimum hydro-massage. Each jet separately

controls the amount of air and water you allow into

the whirlpool during operation. The amount of air

and water, and thus the intensity of your

hydro-massage experience, is determined by how

far you open the Flexjet trim ring.

A. GETTING READY TO USE YOUR BODYSPA

WARNING: Risk of injury or property damage.

BodySpa controls are factory installed. Do not

relocate or modify controls as this could adversely

affect safe operation.

Please read and follow these steps carefully so you can

safely enjoy the benefits of BodySpa hydro-massage

bathing.

S Remove your eyeglasses, contact lenses, and

loose jewelry before entering the BodySpa module.

S Shower before using your BodySpa, if you desire.

S Do not use shampoo, soap, or bubble bath in the

module bath water. Shampoo and soap may be

used for showering before filling the bath basin.

S Rinse down the enclosure and bath to remove soap

residue and debris.

S Remove all loose bathing items such as soap bars,

shampoo bottles, and washcloths from the

BodySpa module.

S Close the drain, and fill the bath basin with

tempered water to a level at least 2" above the

suction cover. Do not allow the water temperature

to exceed 104 F.

S Enter the BodySpa module, and close the door

tightly.

114825-5-

(A)

Kohler Co., Kohler WI