Kohler Chablis K-2081 Manuel d'instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Kohler Chablis K-2081. Kohler Chablis K-2081 13 pages. Vitreous china pedestal lavatory
Également pour Kohler Chablis K-2081 : Manuel d'installation (16 pages), Manuel du propriétaire (12 pages)
![Kohler Chablis K-2081 Manuel d'instructions d'installation](/uploads/products/server2/2592173/2592173.png)
TOOLS REQUIRED
S
Level
S
Drill with assorted bits
S
Socket wrench with 8" (20.3cm)
extension and assorted sockets
S
Tape measure
S
Framing square
INSTALLATION
S
Rough-in the supplies and drain
piping and trap.
NOTE: The supply stop handles
cannot extend more than 4-3/4"
(12.1cm) from the finished wall when
in the open position.
S
Install sufficient backing behind
the finished wall to provide a
secure material for the anchoring
devices.
S
Install hanger to wall according
to roughing-in dimensions.
S
Apply four self-adhesive gaskets
(provided) on the top edge of the
pedestal
S
Mark the centerline on the floor.
S
Position the pedestal on the floor
centerline so the mounting hole
is approximately 8-3/8" (21.3cm)
from the finished wall.
S
Position the lavatory on the
hanger and pedestal.
S
Move the pedestal as required
to ensure proper fit in the
desired location.
NOTE: The
lavatory
supported by the hanger and
pedestal.
S
Check the lavatory placement.
S
Mark the center of each
anchoring hole on the wall, and
mark the floor through the hole
in the pedestal bottom.
S
Carefully remove the lavatory
from the pedestal. Then move
the pedestal from the area.
A
1010420-2-
MATERIALS REQUIRED
S
1/4" lag bolts and washers (6)
S
Wood screw and washer (1)
Lag
Bolts
Gaskets
Top of Pedestal
Finished
Wall
must
be
Anchoring
Holes
2
Kohler Co., Kohler, WI U.S.A.
Hanger
Pedestal
Mark Floor
Here