Kohler K-1164 Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler K-1164. Kohler K-1164 48 pages. Bath with airjets
Également pour Kohler K-1164 : Manuel du propriétaire (32 pages), Manuel du propriétaire (29 pages), Manuel du propriétaire (36 pages), Manuel d'installation (4 pages), Manuel d'installation (44 pages), Manuel d'installation et d'entretien (21 pages), Manuel du propriétaire (29 pages)

GFCI-Protected

Receptacle

6. Make Electrical Connections

DANGER: Risk of electric shock. Connect the blower motor to a properly grounded,

grounding-type receptacle protected by Ground-Fault Circuit-Interrupters (GFCI's) or Residual

Current Devices (RCD's). Do not remove the plug grounding pins. Do not use grounding adapters.

NOTE: The bath with airjets model number is printed on a label near the blower motor. This label also

identiﬁes the electrical rating.

Your Kohler bath with airjets is equipped with a cord and plug. The blower motor has been wired

at the factory. A licensed electrician must install a dedicated GFCI-protected, 120 V, 15 A, grounded

outlet. Locate the outlet behind the bath and within 24" (61 cm) of the blower motor.

Plug the blower motor into this outlet.

Clean the area of all dust and debris.

Kohler Co.

Blower Motor

1034591-2-F