Kohler K-1164 설치 매뉴얼 - 페이지 9

{카테고리_이름} Kohler K-1164에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1164 48 페이지. Bath with airjets
Kohler K-1164에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (32 페이지), 주택 소유자 매뉴얼 (29 페이지), 주택 소유자 매뉴얼 (36 페이지), 러프인 매뉴얼 (4 페이지), 설치 매뉴얼 (44 페이지), 설치 및 관리 매뉴얼 (21 페이지), 주택 소유자 매뉴얼 (29 페이지)

GFCI-Protected

Receptacle

6. Make Electrical Connections

DANGER: Risk of electric shock. Connect the blower motor to a properly grounded,

grounding-type receptacle protected by Ground-Fault Circuit-Interrupters (GFCI's) or Residual

Current Devices (RCD's). Do not remove the plug grounding pins. Do not use grounding adapters.

NOTE: The bath with airjets model number is printed on a label near the blower motor. This label also

identiﬁes the electrical rating.

Your Kohler bath with airjets is equipped with a cord and plug. The blower motor has been wired

at the factory. A licensed electrician must install a dedicated GFCI-protected, 120 V, 15 A, grounded

outlet. Locate the outlet behind the bath and within 24" (61 cm) of the blower motor.

Plug the blower motor into this outlet.

Clean the area of all dust and debris.

Kohler Co.

Blower Motor

1034591-2-F