AEG LAVATHERM 59800 Informations sur l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Informations sur l'utilisateur pour {nom_de_la_catégorie} AEG LAVATHERM 59800. AEG LAVATHERM 59800 32 pages. Aeg condenser dryer with heat pump
Également pour AEG LAVATHERM 59800 : Informations sur l'utilisateur (36 pages)
Imprimer la page
Clean the entire filter area
3
The strainer area does not have to be cleaned after every drying cycle,
but should be checked regularly and cleaned of fluff if necessary.
6. To do this, grip the top of the large
mesh filter and pull it forwards un-
til it comes loose from the two
brackets.
7. Remove fluff from the entire filter
area. It is best to use a vacuum
cleaner for this purpose.
8. Press both lugs of the large mesh
filter into the brackets on the load-
ing door until they snap into place.
9. Re-insert fine strainer.
10. Press against the large mesh filter
until it locks into the interlock.
3
If the fine strainer is not fitted, the
large mesh filter will not snap into
place and the door cannot be
closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cy-
cle has finished.
Emptying the water reservoir
Empty water reservoir after every drying cycle.
If the water reservoir is full, an active programme will be interrupted
automatically and the EMPTY WATER display will light up. In order to
continue the programme, the water reservoir must be emptied.
1
Warning! The condensed water is not suitable for drinking or for pre-
paring foodstuffs.
17