- ページ 17

ドライヤー AEG LAVATHERM 59800のPDF ユーザー情報をオンラインで閲覧またはダウンロードできます。AEG LAVATHERM 59800 32 ページ。 Aeg condenser dryer with heat pump
AEG LAVATHERM 59800 にも：ユーザー情報 (36 ページ)

ページを印刷する

Clean the entire filter area

The strainer area does not have to be cleaned after every drying cycle,

but should be checked regularly and cleaned of fluff if necessary.

6. To do this, grip the top of the large

mesh filter and pull it forwards un-

til it comes loose from the two

brackets.

7. Remove fluff from the entire filter

area. It is best to use a vacuum

cleaner for this purpose.

8. Press both lugs of the large mesh

filter into the brackets on the load-

ing door until they snap into place.

9. Re-insert fine strainer.

10. Press against the large mesh filter

until it locks into the interlock.

If the fine strainer is not fitted, the

large mesh filter will not snap into

place and the door cannot be

closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cy-

cle has finished.

Emptying the water reservoir

Empty water reservoir after every drying cycle.

If the water reservoir is full, an active programme will be interrupted

automatically and the EMPTY WATER display will light up. In order to

continue the programme, the water reservoir must be emptied.

Warning! The condensed water is not suitable for drinking or for pre-

paring foodstuffs.