- ページ 15

ドライヤー AEG LAVATHERM 59800のPDF ユーザー情報をオンラインで閲覧またはダウンロードできます。AEG LAVATHERM 59800 32 ページ。 Aeg condenser dryer with heat pump
AEG LAVATHERM 59800 にも：ユーザー情報 (36 ページ)

ページを印刷する

Removing laundry or loading laundry when necessary

1. Open loading door

Warning! Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close the door securely. Lock must audibly lock.

4. Press the START/PAUSE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, the END and CREASE GUARD indica-

tors light up. If the SIGNAL button has been pressed, an acoustic signal

sounds intermittently.

The drying cycles (except for the WOOL programme) are automatically

followed by an anti-crease phase which lasts around 30 minutes. The

drum rotates at intervals during this phase. This keeps the laundry loose

and free of creases. The laundry can be removed at any time during the

anti-crease phase. (The laundry should be taken out towards the end of

the anti-crease phase at the latest to prevent creases from forming.) If

LONG ANTICREASE has been selected, the anti-crease phase is length-

ened by 60 minutes.

1. Open door.

2. Before removing the laundry, remove fluff from the micro-fine filter. It

is best to use a damp hand for this purpose. (See "Cleaning and mainte-

nance" section.)

3. Remove laundry.

4. Turn the programme selector to OFF.

Important: After each drying cycle

– Clean the micro-fine filter and fine filter

– Drain the condensed water container

(See section "Cleaning and maintenance".)

5. Close door.