AEG LAVATHERM T65170AV Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG LAVATHERM T65170AV. AEG LAVATHERM T65170AV 24 pages.

1. Pull the ring nut A from the vent

outlet at the rear.

2. Screw on the ring nut to the hose

and push it into position.

3. The not used vents must be sealed

with supplied covers.

15.3 Load door reversal

WARNING!

Before changing the door

stop, disconnect the mains

plug.

Note regarding contact

protection: The appliance is

only secure for operations

again once all plastic parts

have been put.

1. Open load door.

2. Unscrew hinge A from the front of

the appliance and remove the load

door.

3. Remove cover plates B. To do this,

put a thin screwdriver into the slots

as shown in the illustration, push

A A

down lightly and remove the cover

plates.

4. Use an applicable tool and apply

pressure to unlock part C, remove

and turn it through 180°, then put on

the other side. There is a small spring

below locking block C. To put all

parts together correctly, look at the

illustrations:

ENGLISH