AEG LAVATHERM T65170AV 사용자 설명서 - 페이지 19

{카테고리_이름} AEG LAVATHERM T65170AV에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM T65170AV 24 페이지.

1. Pull the ring nut A from the vent

outlet at the rear.

2. Screw on the ring nut to the hose

and push it into position.

3. The not used vents must be sealed

with supplied covers.

15.3 Load door reversal

WARNING!

Before changing the door

stop, disconnect the mains

plug.

Note regarding contact

protection: The appliance is

only secure for operations

again once all plastic parts

have been put.

1. Open load door.

2. Unscrew hinge A from the front of

the appliance and remove the load

door.

3. Remove cover plates B. To do this,

put a thin screwdriver into the slots

as shown in the illustration, push

A A

down lightly and remove the cover

plates.

4. Use an applicable tool and apply

pressure to unlock part C, remove

and turn it through 180°, then put on

the other side. There is a small spring

below locking block C. To put all

parts together correctly, look at the

illustrations:

ENGLISH