Kohler K-3082 Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler K-3082. Kohler K-3082 36 pages. Mirrored cabinet
Également pour Kohler K-3082 : Manuel d'installation (32 pages), Manuel du propriétaire (16 pages), Manuel d'installation (29 pages)

Imprimer la page

1. Attach the End Caps

Locate the spacer blocks and hardware bag.

Use masking tape to secure the spacer blocks to the outside of the

cabinets. Make sure the pilot holes line up with the recommended

holes in the mirror cabinet.

Position the end caps so the beveled edges are toward the mirror

and the front of the cabinet. Align the end caps so they are

centered to the mirror height. The end caps should be ﬂush with

the back of the cabinet. Hold or clamp carefully (protect the

surface if clamping) until the attachment screws are in place.

Partially drive four #10 x 1-1/4" screws (provided) through the

inside location holes, through the spacer block holes, and into the

end caps. Tighten the screws to secure the end caps.

Install the dome cap covers over the screw heads.

Kohler Co.

1010988-2-C