Kohler K-3082 설치 매뉴얼 - 페이지 9

{카테고리_이름} Kohler K-3082에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-3082 36 페이지. Mirrored cabinet
Kohler K-3082에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 주택 소유자 매뉴얼 (16 페이지), 설치 매뉴얼 (29 페이지)

페이지 인쇄

1. Attach the End Caps

Locate the spacer blocks and hardware bag.

Use masking tape to secure the spacer blocks to the outside of the

cabinets. Make sure the pilot holes line up with the recommended

holes in the mirror cabinet.

Position the end caps so the beveled edges are toward the mirror

and the front of the cabinet. Align the end caps so they are

centered to the mirror height. The end caps should be ﬂush with

the back of the cabinet. Hold or clamp carefully (protect the

surface if clamping) until the attachment screws are in place.

Partially drive four #10 x 1-1/4" screws (provided) through the

inside location holes, through the spacer block holes, and into the

end caps. Tighten the screws to secure the end caps.

Install the dome cap covers over the screw heads.

Kohler Co.

1010988-2-C