AQC MAXIPLY DMP-170S Manuel du propriétaire - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AQC MAXIPLY DMP-170S. AQC MAXIPLY DMP-170S 20 pages. Open type dust collector

Imprimer la page

11.2

Remplacement of the filter enveloppe

1 . Unfasten the attachment bars at the bottom of the filter envelope located on all four (4) sides

of the collector.

2 . Remove the upper filter envelope support rods (rubber bands for optional manual shaker

system)

3. Remove the filter envelope from the lower frame.

4. Position the new filter envelope on the frame and reinsert the support rods. Ensure the

fasteners are tightened and the filter envelope is well in place.

5. Reinstall the attachment bars or rubber bands for the optional manual shaker system.

MAINTENANCE AND INSPECTION

The chart indicated below shows different inspections and the frequency at which they should be

performed.

Frequency of

inspections

Daily

Weekly

Semi-

annually/Annually

Components

Dust collector

Filter envelope

Dust collector

Multiple pocket type dust collector

Procedures

Check for dust leaks around the air inlet and the filter en-

velope frame. Refer to Troubleshooting on page 17 of this

manual.

Check dust level in dust storage bin. Empty.

Check for leaks on the filter envelope. Repair or replace if

necessary. Ensure the filter envelope is securely fastened.

Examine, clean and apply paint touch-ups if necessary.

If needed, lubricate the shaker and shaft rocking system

using lithium base grease.