Aqua Computer farbwerk Manuel d'utilisation et d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Aqua Computer farbwerk. Aqua Computer farbwerk 20 pages. High power led controller for pcs

Imprimer la page

1. Electrical Connections

aqua

computer

FARBWERK

In the AIDA64 preferences menu, writing to WMI must be activated in the „external

applications" sub-menu:

After activating "Use sensor with Aqua Computer Service" in the aquasuite, click

the "Select data source" button to assign the currently selected software sensor to

a temperature sensor provided by third party software.

Software sensor values will only be available while all involved programs are run-

ning, so no data will be available while the operation system is starting up or shut-

ting down or if an involved program is closed. If no data is available or the data

has not been updated within the time interval defined as "Timeout in s", the

aquaero will use the "Fallback temperature" instead. As soon as data is available

again, normal operation of the software sensor will resume automatically.

10. Controller configuration(aquasuite)

Select "Controller" from the device list to configure the four LED outputs.

10.1. Output mode

Each RGB output can be controlled by a temperature sensor input or software

temperature sensor, by an external controller (for instance from an aquaero 5/6

connected via aquabus, via Bluetooth connection or third party software), set to a

fixed color or a color gradient. A copy function can be used to transfer all settings

from another previously configured controller.

- 14 -

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen