Aqua Computer AQUASTREAM XT USB Manuel d'utilisation et de fonctionnement - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et de fonctionnement pour {nom_de_la_catégorie} Aqua Computer AQUASTREAM XT USB. Aqua Computer AQUASTREAM XT USB 16 pages.
Également pour Aqua Computer AQUASTREAM XT USB : Manuel d'utilisation et d'installation (20 pages)
Imprimer la page
aqua
computer
Version 11/2007
MANUAL AQUASTREAM XT
XT has an excess temperature protection unit so that a switching off is
automatically carried out at a too high load to avoid damages. The output,
however, is not short-circuit proof!
6.5. Attach an external temperature sensor (only ultra-variant)
Attach a 10 kΩ NTC temperature sensor (Order no. 53026) at the
connection "deaeration/ext. temp" while the PC is turned off. Place the sensor
top to the point whose temperature you would like to measure.
Caution: Place the sensor under no circumstances between processor and
cooler! Moreover, do not expose the sensor to any pressure since it is very
sensitive.
6.6. Attaching flow rate sensor (only ultra-variant) or aquabus (all variants)
At the standard and advanced variant the connection "aquabus/flow" is
configured as an aquabus and can be used e.g. To connect the pump to an
optionally available aquaero. A use as a connection for a flow sensor is not
possible at these variants!
This connection is covered with two functions at the ultra variant. In the
delivery state the connection is configured as an aquabus, however, the
aquasuite software can be used to configure the connection to be used with a
flow sensor. A simultaneous use of aquabus and flow sensor is not possible at
the connection. You find details for the available settings in the aquasuite
software on page 11.
The flow sensor and the special interconnecting cable are optional
accessories and can be purchased separately.
6.7. Internal water temperature sensor (only ultra-variant)
The aquastream XT has an internal water temperature sensor which is already
pre-assembled. This sensor can be monitored only in the aquastream XT
ultra-variant.
6.8. Internal temperature sensor for the controller board
The controller board of the aquastream XT is equipped with a pre-assembled
temperature sensor. The advanced- and ultra variant has in addition a two-
step protective function to avoid an overload of at the fan connector and a
possible damage to the controller board.
© 2007
Aqua Computer GmbH und Co. KG
Page 7
Gelliehäuser Str. 1 – D-37130 Gleichen - Germany