AAVIX AGT3420 Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AAVIX AGT3420. AAVIX AGT3420 20 pages. 20 inch 15amp snow thrower

Imprimer la page

Assembly

Middle & Upper Handle

1. Connect the lower handle and

middle handle with locking knobs and

bolts. ( Fig. 3)

Fig.3

2. Connect the upper handle and

middle handle with locking knobs and

bolts.

3. Attach the cable-clamp to the

position shown and then attach the

cable. (Fig.4)

Direction Adjustment Lever

1. Remove the screw from the upper

lever. Insert the lower lever into the

upper lever, tighten them with the

screw removed. (Fig.5)

Fig.5

2. Insert the lever bracket into the hole

on the upper handle, tighten it with

flat washer, spring washer and

butterfly nut. (Fig.6)

Fig.6

3. Remove the cotter pin from the gear

lever. Insert the lower lever into the

hole of the gear lever. Then secure it in

place with the cotter pin. (Fig.7)

Fig.7

4. Check the discharge chute by

turning it fully from left to right

Fig.4

(0~180°). The discharge chute should

rotate freely. (Fig.8)

Fig.8