Aqua Cooler AC-PV8EBFY-ASM Manuel d'utilisation et d'entretien - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Aqua Cooler AC-PV8EBFY-ASM. Aqua Cooler AC-PV8EBFY-ASM 11 pages.

Imprimer la page

INSTALLATION CONT.

INSTALLATION B: Connecting the water line

For the single "Versafiller ready" cooler, the tube to connect to the Versafiller is found inside the

access panel (the compressor compartment). This tube supplies cold water from the cooling tank

to the Versafiller. For split level "Versafiller ready" coolers, the tube to plumb in the Versafiller is

packaged in the dummy unit.

The tee and tube to the Versafiller are packaged with the PWEBF unit. One branch of the tee will

supply the valve on the dummy unit, the other branch of the tee will connect to the Versafiller.

Your Partner in Cool.

INSTALLATION CONT.

If a filter is being installed, cut a piece of tubing about 3" long to insert (optional) flow switch

right after filter and before tee. This allows Versafiller counter to accurately calculate amount of

water passing through filter.

With the cooler top removed, find the tube going from the cooling tank outlet to the valve. The

TEE fitting (supplied) will need to connect between the cooling tank and valve.

Disconnect tubing from the elbow on the valve.