A.H. Systems SAS-521-2 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} A.H. Systems SAS-521-2. A.H. Systems SAS-521-2 15 pages. Bilogical antenna

Imprimer la page

A.H. Systems SAS-521-2 Bilogical Antenna

OPERATING INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

The SAS-521-2 Bilogical Antenna is shipped with the triangle and window

elements removed from the boom, this allows for easy transportation. The

Bilogical Antenna also comes with the LPM-510 tripod mounting adapter that is

already assembled onto the antenna.

Remove the triangular elements and the 3-sided pieces from the case. Attach

the 3-sided pieces to the triangular pieces with the captive screws installed in

the triangular fittings.

Attach the element assemblies (with the 3-sided pieces towards the short log

periodic end) to the Bilogical boom in front of the black balun housing with the

pre-installed captive screws.

MOUNTING INSTRUCTIONS

The model SAS-521-X antennas have a mid-mount adapter supplied with the

antenna to allow mounting at the CG of the antenna. Mounting the antenna to

the extension rod enables the antenna to be used in either horizontal or vertical

polarization.

20 mounting screw.

rod with the supplied ¼-20 captive mounting screw.

Attach the antenna to the azimuth and elevation head (AEH-510) through the

screw hole in the antenna base. The azimuth and elevation head (AEH-510)

mounts to the tripod (ATU-510) top and allows the antennas to be rotated 360

degrees and tilted between horizontal and vertical polarization. Each tripod leg

is independently adjustable in angle and length to facilitate antenna height

setting. The tripod legs have a rubber tip on one end for indoor or hard surface

use, and a metal spike on the other end for outdoor soft surface (such as dirt)

use.

REV C

Mount the BTE-510 tripod extension rod to the ATU-510 tripod with the ¼-

Mount the assembled antenna to the other end of the BTE-510 extension