A.H. Systems SAS-521-2 Operation Manual - Page 6
Browse online or download pdf Operation Manual for Antenna A.H. Systems SAS-521-2. A.H. Systems SAS-521-2 15 pages. Bilogical antenna
A.H. Systems SAS-521-2 Bilogical Antenna
OPERATING INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
The SAS-521-2 Bilogical Antenna is shipped with the triangle and window
elements removed from the boom, this allows for easy transportation. The
Bilogical Antenna also comes with the LPM-510 tripod mounting adapter that is
already assembled onto the antenna.
Remove the triangular elements and the 3-sided pieces from the case. Attach
the 3-sided pieces to the triangular pieces with the captive screws installed in
the triangular fittings.
Attach the element assemblies (with the 3-sided pieces towards the short log
periodic end) to the Bilogical boom in front of the black balun housing with the
pre-installed captive screws.
MOUNTING INSTRUCTIONS
The model SAS-521-X antennas have a mid-mount adapter supplied with the
antenna to allow mounting at the CG of the antenna. Mounting the antenna to
the extension rod enables the antenna to be used in either horizontal or vertical
polarization.
1.
20 mounting screw.
2.
rod with the supplied ¼-20 captive mounting screw.
Attach the antenna to the azimuth and elevation head (AEH-510) through the
screw hole in the antenna base. The azimuth and elevation head (AEH-510)
mounts to the tripod (ATU-510) top and allows the antennas to be rotated 360
degrees and tilted between horizontal and vertical polarization. Each tripod leg
is independently adjustable in angle and length to facilitate antenna height
setting. The tripod legs have a rubber tip on one end for indoor or hard surface
use, and a metal spike on the other end for outdoor soft surface (such as dirt)
use.
© A.H. Systems inc. – December 2008
REV C
Mount the BTE-510 tripod extension rod to the ATU-510 tripod with the ¼-
Mount the assembled antenna to the other end of the BTE-510 extension
6