Aqua Creek Products F-194PHBL-NA Manuel - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aqua Creek Products F-194PHBL-NA. Aqua Creek Products F-194PHBL-NA 14 pages.
Imprimer la page
1
LIFT THE SUPER POWER EZ MAST ASSEMBLY FROM THE SHIPPING CONTAINER. INSERT THE 1.90"
[48mm] POST OF THE MAST ASSEMBLY INTO THE DECK ANCHOR. EASE THE MAST ASSEMBLY DOWN
UNTIL IT RESTS ON THE INNER SURFACE OF THE ANCHOR. THE SQUARE MAST TUBE WILL REMAIN
ABOVE THE DECK SURFACE APPROXIMATELY 1/2"
2
REMOVE THE ACTUATOR FROM THE SHIPPING BOX. CONNECT
THE ACTUATOR TO THE MAST. TIGHTEN NYLOCK NUTS.
NOTE: BE CAREFUL NOT TO OVERTIGHTEN BOLTS. OVER-TIGHTENING
CAN CAUSE DAMAGE AND COMPROMISE THE SAFETY OF YOUR LIFT.
NN - 5/16"-18 NYLOCK NUT
WF - 5/16" FLAT WASHER
DETAIL STEP 02
SCALE 1 : 2
BS - 3/8"X1 1/4"X5/16"-18 SHOULDER BOLT
3 CONNECT THE ACTUATOR TO THE LIFTING ARM. TIGHTEN NYLOCK NUTS.
NOTE: BE CAREFUL NOT TO OVERTIGHTEN BOLTS. OVER-TIGHTENING CAN
CAUSE DAMAGE AND COMPROMISE THE SAFETY OF YOUR LIFT.
NN - 5/16"-18 NYLOCK NUT
WF - 5/16" FLAT WASHER
DETAIL STEP 03
SCALE 1 : 2
BS - 3/8"X2"X5/16"-18 SHOULDER BOLT
PRODUCT ASSEMBLY
Aqua Creek Products
STEP 03
STEP 02
8/8/2022 12:42:18 PM PAGE - 11