Aqua Creek Products F-194PHBL-NA 매뉴얼 - 페이지 11

{카테고리_이름} Aqua Creek Products F-194PHBL-NA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products F-194PHBL-NA 14 페이지.

LIFT THE SUPER POWER EZ MAST ASSEMBLY FROM THE SHIPPING CONTAINER. INSERT THE 1.90"

[48mm] POST OF THE MAST ASSEMBLY INTO THE DECK ANCHOR. EASE THE MAST ASSEMBLY DOWN

UNTIL IT RESTS ON THE INNER SURFACE OF THE ANCHOR. THE SQUARE MAST TUBE WILL REMAIN

ABOVE THE DECK SURFACE APPROXIMATELY 1/2"

REMOVE THE ACTUATOR FROM THE SHIPPING BOX. CONNECT

THE ACTUATOR TO THE MAST. TIGHTEN NYLOCK NUTS.

NOTE: BE CAREFUL NOT TO OVERTIGHTEN BOLTS. OVER-TIGHTENING

CAN CAUSE DAMAGE AND COMPROMISE THE SAFETY OF YOUR LIFT.

NN - 5/16"-18 NYLOCK NUT

WF - 5/16" FLAT WASHER

DETAIL STEP 02

SCALE 1 : 2

BS - 3/8"X1 1/4"X5/16"-18 SHOULDER BOLT

3 CONNECT THE ACTUATOR TO THE LIFTING ARM. TIGHTEN NYLOCK NUTS.

NOTE: BE CAREFUL NOT TO OVERTIGHTEN BOLTS. OVER-TIGHTENING CAN

CAUSE DAMAGE AND COMPROMISE THE SAFETY OF YOUR LIFT.

NN - 5/16"-18 NYLOCK NUT

WF - 5/16" FLAT WASHER

DETAIL STEP 03

SCALE 1 : 2

BS - 3/8"X2"X5/16"-18 SHOULDER BOLT

PRODUCT ASSEMBLY

Aqua Creek Products

STEP 03

STEP 02

8/8/2022 12:42:18 PM PAGE - 11