Avnet ZUBOARD 1CG Manuel de démarrage - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Avnet ZUBOARD 1CG. Avnet ZUBOARD 1CG 14 pages.

Imprimer la page

Boot FreeRTOS

7. If previously disconnected, plug in the micro-USB cable to the USB-JTAG/UART port.
8. Connect 15V USB C compliant power supply to USB C connector (J15) using USB C
cable. The Power LEDs will illuminate, but the board is not powered on.
LED D22 (Green) VIN
•
LED D16 (Orange) 5V Present
•
LED D15 (Orange) 9V Present
•
LED D14 (Orange) 15V Present
•
LED D17 (Orange) EN SINK
•
Figure 4 – ZUBoard 1CG Good Power LEDs
Figure 3 – ZUBoard 1CG Switch Location
Page 8