Avnet ZUBOARD 1CG Manual de iniciação - Página 8
Procurar online ou descarregar pdf Manual de iniciação para Computadores de placa única Avnet ZUBOARD 1CG. Avnet ZUBOARD 1CG 14 páginas.
Imprimir páginaBoot FreeRTOS
7. If previously disconnected, plug in the micro-USB cable to the USB-JTAG/UART port.
8. Connect 15V USB C compliant power supply to USB C connector (J15) using USB C
cable. The Power LEDs will illuminate, but the board is not powered on.
LED D22 (Green) VIN
•
LED D16 (Orange) 5V Present
•
LED D15 (Orange) 9V Present
•
LED D14 (Orange) 15V Present
•
LED D17 (Orange) EN SINK
•
Figure 4 – ZUBoard 1CG Good Power LEDs
Figure 3 – ZUBoard 1CG Switch Location
Page 8