DFE SW6 Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DFE SW6. DFE SW6 20 pages. Digital tension controller

1.3 MENU MODE AND NAVIGATION

1. OPERATOR MENU - Under the Operator

Menu, the following choices are available:

• Disp Configuration - Tension Update,

Display Damping, Plot Update Time, Line

Speed Display, Diameter Display & Display

Brightness (See Section 2.2, DISPLAY

ADJUSTMENTS for more detail).

• Configure Taper - Taper Enable & Taper

Percentage (See Section 2.5,TAPER

TENSION for more detail).

• Store / Delete Setup - Store Setup & Delete

Setup (See Sections 2.3.1, and 2.3.3 for

more detail).

• Recall Setup - As many as 30 user-named

setups (See Section 2.3.2 for more detail).

2. DIAGNOSTIC MENU - Under the Diagnostic Menu, the following choices are available (All are Read

Only, and are useful for discussions with DFE Tech Support), with all other choices greyed out:

•

Version Menu - Displays versions and revisions of the software and hardware

•

Read Digital Inputs - Displays digital input signals

•

Read Analog Inputs > Transducer - Displays analog input signals from the transducers

•

Read Analog Inputs > Signal Inputs - Displays analog input signals from other than the

transducers

3. SETUP MENU and CALIBRATION MENU - Both require permission-based access and actions in

accordance with the Technical Reference Manual (DFE P/N 801-2540).

continued....

Figure 6 - MAIN MENU