DFE SW6 Operating Instructions Manual - Page 10
Browse online or download pdf Operating Instructions Manual for Controller DFE SW6. DFE SW6 20 pages. Digital tension controller
Print Page
1.3 MENU MODE AND NAVIGATION
1. OPERATOR MENU - Under the Operator
Menu, the following choices are available:
• Disp Configuration - Tension Update,
Display Damping, Plot Update Time, Line
Speed Display, Diameter Display & Display
Brightness (See Section 2.2, DISPLAY
ADJUSTMENTS for more detail).
• Configure Taper - Taper Enable & Taper
Percentage (See Section 2.5,TAPER
TENSION for more detail).
• Store / Delete Setup - Store Setup & Delete
Setup (See Sections 2.3.1, and 2.3.3 for
more detail).
• Recall Setup - As many as 30 user-named
setups (See Section 2.3.2 for more detail).
2. DIAGNOSTIC MENU - Under the Diagnostic Menu, the following choices are available (All are Read
Only, and are useful for discussions with DFE Tech Support), with all other choices greyed out:
•
Version Menu - Displays versions and revisions of the software and hardware
•
Read Digital Inputs - Displays digital input signals
•
Read Analog Inputs > Transducer - Displays analog input signals from the transducers
•
Read Analog Inputs > Signal Inputs - Displays analog input signals from other than the
transducers
3. SETUP MENU and CALIBRATION MENU - Both require permission-based access and actions in
accordance with the Technical Reference Manual (DFE P/N 801-2540).
4
continued....
Figure 6 - MAIN MENU