DFE SW6 Operating Instructions Manual - Page 12

Browse online or download pdf Operating Instructions Manual for Controller DFE SW6. DFE SW6 20 pages. Digital tension controller

Print Page

2.3 SAVING, RECALLING AND DELETING SETUPS

A Saved Setup is a group of settings saved together in a named setup, and is also preserved in non-

volatile memory. Only by saving a named setup after changing one or more settings in that named setup

(overwriting), or by deleting the named setup, can saved settings be lost. The SW6 controller is limited to

30 named setups.

Setups are saved, recalled or deleted through the Operator Menu > Store / Delete Setup and the Operator

Menu > Recall Setup menus, as described below:

1. Store Setup - Select Store Setup, then scroll to

the location in which to store the setup and

press the Select button (Fig. 8).

If overwriting an existing setup, the existing

name will show up on the information line, and

may be accepted as-is. New names must be

entered with the keypad (Fig. 9). Once the

setup name is assigned, and the OK button is

pressed, the screen will advance to confirm the

saved setup with a press of the Save button

(Fig. 10), and return to another screen

indicating the setup was saved. OK must be

pressed to exit.

Figure 9 - NAME SETUP SCREEN

2. Recall Setup - Scroll to the named setup to be recalled (Fig. 11) and press the Recall button. Press

Recall in the next screen to copy the selected setup as the active setup. The controller will return

another screen indicating that the selected setup was recalled. OK must be pressed to exit.

3. Delete Setup - Select Delete Setup, then scroll to the named setup to be deleted and press the Select

button (Fig 12). The controller will return another screen indicating that the selected setup was deleted.

OK must be pressed to exit.

Figure 11 - RECALL SETUP

continued...

Figure 8 - SELECT LOCATION TO STORE

Figure 10 - CONFIRM SAVE SETUP

Figure 12 - SELECT SETUP TO DELETE