Aqua Medic reactor 1000 Mode d'emploi - Page 2

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Aqua Medic reactor 1000. Aqua Medic reactor 1000 5 pages. Co2-reactor
Également pour Aqua Medic reactor 1000 : Manuel d'utilisation (10 pages)

Imprimer la page

2.Set Up/ Installlation

The reactor 1000 has two hose connections for 16/18 mm hose and may be used

externally or internally.

- Mounting inside of the aquarium

The included holding system allows the easy fixing of the reactors at or inside of the

aquarium. The holder is mounted on a vertical or horizontal glass stripe and secured

with the 2 screws.

- Mounting outside of the aquarium

The reactor 1000 may be mounted at a wall or inside the aquarium cabinet. For this, the

holder (6) is removed and the holding plate (7) is directly screwed to the wall or the

cabinet. If the reactor 1000 is used externally, make sure, that both water connections

are tightened and the O-rings (9) are correctly mounted.

Now both holding clamps (7) are mounted and the reactor 1000 is pressed into the

clamps.

Water inlet. The water inlet is connected to the upper hose connection of the reactor

1000 (2). For the water supply, a separate pump ( min 1.000 l/hr , 250 gph) or the water

outlet of a canister filter may be used. A stronger circulation improves the solution of the

carbon dioxide. If the circulation pump is too strong, the reactor can be mounted in a

bypass.

Water outlet. The water outlet is connected to the lower hose connection of the reactor

1000 and with a hose 12/16 mm, ½"

The CO2 is connected to the pressure fitting (3). Make sure, that a non return valve is

mounted between the reactor and the bubble counter of the CO2-unit. The CO2 is

directed downwards inside of the reactor with a hose. By this counter current flow, the

dissolving of the gas is optimised. The Bactoballs give an extra turbulence.

False gas removal. The air in the reactor reactor can be removed with the valve (4)

during starting. Also the false gas which can accumulate in the reactor during operation

can be absorbed by opening the tap for a short time.

Please do always care that the hoses do not bend.

technical data

unit

reactor

water connection port:

CO2-connection:

water flow:

set up:

back to the aquarium.

1000

Art. No:

12/16 mm

6/4 mm

min 1..000 l/std

internally or externally

71113