Aqua Medic reactor 1000 Mode d'emploi - Page 3

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Aqua Medic reactor 1000. Aqua Medic reactor 1000 5 pages. Co2-reactor
Également pour Aqua Medic reactor 1000 : Manuel d'utilisation (10 pages)

Imprimer la page

3. Appliance/ setting

A pressure regulator has to be installed onto the Co2 store bottle before the Co2 reactor

can be set up.

Please read the operation manual relating to these device carefully. We recommend the

pressure regulator >>regular No. 71011<< of our CO2 programme.

After having installed the pressure regulator and the CO2 reactor as stipulated, the

setting up of the CO2 reactor can be started.

1. Switch on the circulation pump for the waterflow.

2. Open the main valve of the CO2 bottle.

3. Fix the working pressure on the pressure regulator to 1 – 2 bar. The working pressure

of the regular is fixed to 1,5 bar.

4. Open the fine tuning valve of the pressure regulator slowly. When doing so control the

outgoing CO2 bubbles of the bubble counter.

5. At first fix 15 bubbles per minute.

6. The CO2 gas flows into the reactor and is absorbed by the running water.

Please always observe the pH-value and amend the quantity of the bubbles according to

demand. Advice: we recommend the bubble counter >>counter No. 71211<< with

integrated non return valve of our CO2 programme.

figu. 2: reactor 1000 on aquarium with automatic CO2 control

7.25

High

Prog

Low

H igh

Low

O ut

CAL

pH4

pH7

pH Computer