Aqua Medic reactor 1000 Petunjuk Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Akuarium Aqua Medic reactor 1000. Aqua Medic reactor 1000 5 halaman. Co2-reactor
Juga untuk Aqua Medic reactor 1000: Panduan Pengoperasian (10 halaman)
Halaman Cetak
3. Appliance/ setting
A pressure regulator has to be installed onto the Co2 store bottle before the Co2 reactor
can be set up.
Please read the operation manual relating to these device carefully. We recommend the
pressure regulator >>regular No. 71011<< of our CO2 programme.
After having installed the pressure regulator and the CO2 reactor as stipulated, the
setting up of the CO2 reactor can be started.
1. Switch on the circulation pump for the waterflow.
2. Open the main valve of the CO2 bottle.
3. Fix the working pressure on the pressure regulator to 1 – 2 bar. The working pressure
of the regular is fixed to 1,5 bar.
4. Open the fine tuning valve of the pressure regulator slowly. When doing so control the
outgoing CO2 bubbles of the bubble counter.
5. At first fix 15 bubbles per minute.
6. The CO2 gas flows into the reactor and is absorbed by the running water.
Please always observe the pH-value and amend the quantity of the bubbles according to
demand. Advice: we recommend the bubble counter >>counter No. 71211<< with
integrated non return valve of our CO2 programme.
2
1
3
figu. 2: reactor 1000 on aquarium with automatic CO2 control
7.25
High
Prog
Low
H igh
4
Low
O ut
CAL
CAL
pH4
pH7
pH Computer
5
11
6
12
10
8
7
9