Aqua Medic Turboflotor Blue 1000 Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Aqua Medic Turboflotor Blue 1000. Aqua Medic Turboflotor Blue 1000 7 pages. Protein skimmer for fishes
Imprimer la page
4. Set-up
The Turboflotor Blue 1000 is a skimmer,
that can be set up in various ways:
1. As an external skimmer, directly mounted on
the aquarium: "Hang on", (fig. 3)
2. For use in the cabinet with a
sump or under tank filter system (fig. 4)
- next to the filter tank
- in the filter tank
Fig.3: Turboflotor Blue 1000 in "Hang on" operation
Set up as an external skimmer on the aquarium - Hang on (fig. 3):
Assemble the necessary parts of the skimmer, (see fig. 1). It now be can be attached to the
aquarium. Look for a protected place within easy reach - at the side or at the back. The venturi
pump is connected with the pressure hose. The length of the flexible tubing should be as short as
possible. The pump must be placed directly below the surface, because the air intake will decrease
if it is mounted deeper. A 6-mm air tube is connected to the air injector (2-9) and fixed above the
water level, so the pump can draw in air. Use the full length of the air hose, which is attached to
the sound absorber (1 - 13).
Now the skimmer can be aligned with the aquarium. The two screws at the bottom of the skimmer
are adjusted in such a way that the skimmer is hanging safely on the aquarium. It is advantageous
if the skimmer is not 100% upright, but leaning slightly (2º) to the aquarium (fig. 3). The skimmer
is then not only hanging more safely, but also back-flow of water from the outflow box over the
4